I've reloaded hundreds of 270 rounds for my 700BDL without a problem. I tried the same reloads in my son's win mod 70 and every round feeds very tight. The die is supposed to resize back to factory specs but everything I try results in the same problem. I've shot them in other 270's with no problems. Any suggestions?

Renegade...

Any chance the bullet is engaging the lands?

Michael

Resize an empty case and try in both actions. If it chambers easily in both, the bullet is seated too far forward, as RD questions.

Renegade, Smoke the bullet on a loaded round and chamber it. If it is contacting the lands of the rifling you will be able to see it. Seat it deep enough that you do not have any contact marks. Different mfg's do use different throating depths. Good luck on that.