Several months back, maybe longer, I read a feature about a do-it-yourself home mauser project. The author went through the barrel replacement procedures, finishing reamer, etc. I thought the article was in one of the NRA Mags; American Rifleman, Hunter, or America's 1st Freedom, but I can't seem to locate that article. Does anyone remember this and can point me to the correct gun mag & month? Thx.

I believe you are referring to the article, Build Your Own Custom Rifle by Bryce M. Towsley in the August 2005 edition of American Rifleman.

I believe you are referring to the article, Build Your Own Custom Rifle by Bryce M. Towsley in the August 2005 edition of American Rifleman.

gringo, that's the one, and I found it! Thank you very much.

Shawn

There is a lot of great info at this forum about building a mauser 98. Look at the sporterising and gunsmithing section.There is everything you need to know about it and alot of nice poeple eager to answer questions.

http://pub176.ezboard.com/bcurioandrelicfirearmsforum

Sincerely,

AL

There is a lot of great info at this forum about building a mauser 98. Look at the sporterising and gunsmithing section.There is everything you need to know about it and alot of nice poeple eager to answer questions.

http://pub176.ezboard.com/bcurioandrelicfirearmsforum

Sincerely,

AL

AL,
Thx, and I looked at the site but wasn't able to "see" any specific info. I suppose I need to register to get to the good stuff?

Shawn

You'll see the same items on that board whether you're registered or not.

You'll see the same items on that board whether you're registered or not.

Thx Kdub. Seems to be more general overview info rather than get-down-and-dirty specific info, unless I'm just not navigating the board correctly.