The web's most comprehensive user-interactive handloading database! Find the loading data created by handloaders, for handloaders, post your pet loads, or access and develop your own online loading database with our LoadNotes personal handloading database software. This feature, unique in its concept and intuitive in it's data presentation is fast to access, superbly organized and comprehensive in scope.Our online forums for questions and answers on many shooting and outdoor related topics. A dynamic, active, and well-informed resource for your enjoyment and interaction. Our most used resource on this website! Come share the experience with us!
» Advanced

Go Back   Shooters Forum > Handloading > Handloading Procedures/Practices
Register FAQ Members List Donate Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Rate Thread Display Modes
  #1  
Old 07-24-2004, 09:29 AM
Beartooth Regular
 
Join Date: Feb 2004
Location: maine
Posts: 40
Vertical Stringing?

I loaded up to batches of identical ammo, treating all cases the same way and hand weighing each powder charge, with the only difference being the primer used. The load was for my 44mag using 21.2 gr H110 and a 325 gr WLNGC Bear Tooth bullet. The two primers used were the Winchester Large pistol and the CCI 350. The CCI 350 shot a cylinder into just under 2" at around 50yds in a typical clover leaf like pattern. The WLP shot its cylinder into about 3"but the bullets hit in a perfect vertical string. There was no deviation left or right just a perfect vertical string. Until I get some more components to try again doeas anyone have any idea what would cause the verticsal stringing? I am begining to think it was just me.
Reply With Quote
  #2  
Old 07-24-2004, 10:09 AM
Beartooth Regular
 
Join Date: Jun 2004
Location: Thunder Bay, Ontario
Posts: 47
I was wondering the same thing myself, my 300 wby tends to shoot in a vertical string but still very accurate. To me it looked like they were shooting higher as the barrel got warmer. Not sure if that would even make sense for a 44 mag but that's my best guess.
Reply With Quote
  #3  
Old 07-24-2004, 04:51 PM
Marshall Stanton's Avatar
Super Moderator
 
Join Date: Dec 2000
Location: North Idaho Panhandle
Posts: 3,372
Erick,

I would wager to say that the vertical stringing you describe with your .44 mag are user induced variables. Whether sight acquisition, or slight variations in hold. The fact that the group exhibited a perfectly in-line 3" string would tell me, if I shot the group, that I had arrived at the right load, and simply needed to work on my shooting form a little.

Sounds like you have a great load in the works. By-the-way, in all our years of selling that .44-325gWLNGC bullet, 21.0g H110/WLPP has proven to be THE consistent accuracy load with the bullet, that I can recommend to just about anyone, and the performance obtained is rarely improved upon, even with the most dedicated load development.

Sounds like you hit the sweet-spot!

Keep us posted.

God Bless,
__________________
Marshall
Romans 1:16



Beartooth: A Bullet Worth Waiting For!
Reply With Quote
  #4  
Old 07-24-2004, 05:33 PM
Beartooth Regular
 
Join Date: Feb 2004
Location: maine
Posts: 40
Marshal,

That is what I was thinking. I just finished loading up another 25 rounds with each primer and will shoot them this week. I am shooting this load out of a SBHH with 7.5" barrel, do you have any idea what the velocity might be? I hope to shoot a bear this fall with this load. I am firm beliver in shoulder shots and hope to see what this bullet will do.

Thanks,
Erick
Reply With Quote
  #5  
Old 07-25-2004, 08:51 AM
Marshall Stanton's Avatar
Super Moderator
 
Join Date: Dec 2000
Location: North Idaho Panhandle
Posts: 3,372
Erick,

With your 7.5" SBHH, I would say that you are somewhere in the 1300 fps category with this load! Give or take a little depending upon your cylinder gap, but well into some serious horsepower for a .44 magnum to be sure! In any event, you'll never recover a bullet from a critter with that load.... at least not the FIRST critter if they're lined up!

Keep us posted!

God Bless,
__________________
Marshall
Romans 1:16



Beartooth: A Bullet Worth Waiting For!
Reply With Quote
  #6  
Old 07-25-2004, 09:14 AM
Beartooth Regular
 
Join Date: Jan 2001
Posts: 1,597
Marshall

I've had the vertical stringing also and found that it was recoil induced. The barrel bouncing away from the hard shooting rest or bench.
Jim
__________________
Cast bullets are the true and rightous path to shooting bliss
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Vertical shot stringing, 35 Rem Marlin Jimmy Leverguns and Their Cartridges (General) 5 01-04-2003 07:05 PM
Barrel band and stringing shots mundumugu Leverguns and Their Cartridges (General) 5 05-18-2002 03:03 PM
.300 weatherby, vertical stringing Joel B Rifles and Rifle Cartridges 5 04-25-2002 07:41 AM
Vertical stringing Kragman71 Leverguns and Their Cartridges (General) 10 04-03-2002 06:54 PM


All times are GMT -8. The time now is 04:52 AM.

< Contact Us - Shooters Forum - Archive >

 
 

All Content & Design Copyright © 1999-2002 Beartooth Bullets, All Rights Reserved
View Privacy Policy | Contact Webmaster | Legal Information
Website Design & Development By Exbabylon Internet Solutions
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.0 PL2