Shooters Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Handloading Equipment
    David - Welcome to the board. You can't advertise items for sale on the board until you have been a member for at least 10 days and/or have posted a minimum of 25 meaningful posts. Please read the posting rules in the Trading Post forum. kdub - Moderator
  2. Gunsmithing
    I own a S&W model 19-3 revolver that I reload for. I go as often as I can to the range to test out my recipes. For the last couple of months, I have been getting the occasional misfire due to light strikes on the primer. I am using CCI 500 brand primers. I know they are light strikes because...
  3. Rifles and Rifle Cartridges
    Ran into something I have never had happen before in 40 years of shooting. I just finished building a .300 BLK. Took it out for a test fire using Remington UMC 120gr OTFB Supersonic ammunition. The rifle fired well. However, after picking up my brass, I noticed a full 70% of the brass was...
  4. Handloading Procedures & Practices
    Read around a bit, and seems like a good community here, so here 'goes with my first post... Reloading experience so far has been tagging along, so to speak. Got my own setup now, and first off is my 30-30 win for the Model 94. Grabbed some Hornady 150 gr RN, and was planning on starting at...
  5. Gunsmithing
    New member here. I recently purchased the Century Arms semi-auto version of the Uzi - the UC9. It's chewing up a lot of my brass. The bottom of the cartridge has the impression of the extractor stamped on many of the casings. (But not all of them.) ALSO, many of the primers appear to have the...
  6. Handgun Cartridges
    Hello all, I recently purchashed a Lee Breech lock Challenger. i have purchased a lee 9mm luger 3 die set and a Lee Carbide Factory Pistol Crimp Die 9mm Luger 90860. ok i will be using once fired brass cartridges. i have purchased some 9MM caliber 125 grain Round Nose bullets - 250 count MATCH...
  7. Handloading Procedures & Practices
    Hello all, I recently purchashed a Lee Breech lock Challenger. i have purchased a lee 9mm luger 3 die set and a Lee Carbide Factory Pistol Crimp Die 9mm Luger 90860. ok i will be using once fired brass cartridges. i have purchased some 9MM caliber 125 grain Round Nose bullets - 250 count MATCH...
  8. Shotguns, Shotgunning, and Shotshell Reloading
    I have been reloading my shells for Skeet and Trap for about a year now with no problems. I wanted to load up some #4 buck for home defense and started looking at recipes. Which brought about a few questions. 1. What is the difference in a Fed 209 primer and a Winchester 209. All of the...
  9. Muzzleloaders
    I was wondering if anyone, familiar with antique firearms, might recognize and be able to tell me something about this primer box. It is thin brass, compression fitting top and is quite worn. I found this in my grandfathers things after he passed. He had some items from his grandfather who was...
1-9 of 9 Results
Top