Ruger Single-Actions: America's Best Do-It-Yourself Kit! - Shooters Forum
» Advanced

Go Back   Shooters Forum > Article Comments > Tech Notes
Register FAQ Members List Donate Calendar Search Today's Posts Mark Forums Read



Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-17-2005, 12:25 AM
Marshall Stanton's Avatar
Super Moderator
 
Join Date: Dec 2000
Location: North Idaho Panhandle
Posts: 3,373
Lightbulb Ruger Single-Actions: America's Best Do-It-Yourself Kit!


Registered Users do not see the above ad.


Comment on this Tech Notes article:


Thank you for your comments.
__________________
Marshall
Romans 1:16



Beartooth: A Bullet Worth Waiting For!
Reply With Quote
  #2  
Old 07-17-2005, 05:53 AM
Beartooth Regular
 
Join Date: Feb 2005
Location: Lovettsville, VA
Posts: 2,451
A great article and the gun came out beautiful. I've had two other problems with the Ruger SA. The cylinder pin pops out, even on the 22lr. I have also seen this happen on a brand new gun firing its first cylinderfull. I use the Belt Mountain pins but is there another way to fix this problem? Also what do you do to keep the screws from coming loose? I had the ejector rod housing fly off a couple of times and it ruined the part. That was with a 44 special load in a SBH. I had just tightned the screw as I usually do after 3 cylinderfulls. Why hasnt Roger ever addressed these problems? Red Locktite did not work.
Reply With Quote
  #3  
Old 07-17-2005, 07:15 AM
Marshall Stanton's Avatar
Super Moderator
 
Join Date: Dec 2000
Location: North Idaho Panhandle
Posts: 3,373
Ironhead,

Indeed the cylinder base pin is an issue on these guns, and the Belt Mtn. pin is the best remedy to this situation. In fact the next segment of this article will deal with installing the Belt Mtn. pin as well as some other small customizing tricks that are low/no budget, only investing in a bit of time.

Regarding the screws on the Ruger revolvers, I'm surprised that the red Loctight didn't do the trick. On most of my revolvers I simply use clear fingernail polish on the screws before installing them and they never work loose any more, yet can be broken loose should disassembly become necessary.

God bless,
__________________
Marshall
Romans 1:16



Beartooth: A Bullet Worth Waiting For!
Reply With Quote
 
  #4  
Old 07-17-2005, 07:28 AM
Beartooth Regular
 
Join Date: Jul 2004
Location: U.P Michigan
Posts: 248
[QUOTE=Marshall Stanton]Ironhead,

Indeed the cylinder base pin is an issue on these guns, and the Belt Mtn. pin is the best remedy to this situation. In fact the next segment of this article will deal with installing the Belt Mtn. pin as well as some other small customizing tricks that are low/no budget, only investing in a bit of time.

I had the same problem with basepin jumping out too. Simple, easy cure. Looked at my freedom arms 454 casull. Took basepin out and drilled and tapped a 6-48 hole and used a long filler plug with a .050 allen head. Snugged her up and used the mark set screw made on barrel and drilled a small dimple for set screw to rest in. Took about 45 minutes to do and had the filler screw so it was basically free. Nevr a problem again. God Bless Steve
Reply With Quote
  #5  
Old 07-17-2005, 04:05 PM
Beartooth Regular
 
Join Date: Jul 2002
Location: southern IN
Posts: 1,086
Excellent article, Thank you for posting it. I wanted to tighten up my stainless Vaquero, bought a 44 mag cylinder from Gary Reeder that matched the overall lenght of mine. Fitted the cylinder gap to .002" and rechambered it for 45 Colt, all the cylinders for different calibers being the same diameter. I installed a super blackhawk trigger and tuned the action. It has a 5 1/2" barrel that will get shortened to 4 3/8" someday. I agree with your idea of a packing around gun.
Reply With Quote
  #6  
Old 07-17-2005, 07:58 PM
MikeG's Avatar
The Hog Whisperer (Administrator)
 
Join Date: Jan 2001
Posts: 32,909
Just need to make some decent looking stocks....
Attached Thumbnails
Ruger Single-Actions:  America's Best Do-It-Yourself Kit!-mesquitestocks.jpg  
__________________
MikeG

Quote:
Originally Posted by faucettb
Welcome to the forum. Rules are simple, be nice and join in.
Reply With Quote
  #7  
Old 07-18-2005, 09:40 PM
Beartooth Regular
 
Join Date: Sep 2002
Posts: 3,023
Marshall,
great article. Not that I need another one, but one of the local stores has a 5.5" stainless Bisley in .45 on sale for a bit under $400. The thing is always sitting there all lonely when I go in for bullets, looking rather unhappy, surrounded by all it's plastic counterparts.

I have a Bisley Vaquero in .44 Mag that I don't much at all care for, mainly as a result of the sights and crappy case finish. I was thinking of putting the Bisley grip frame on my 4 5/8" .41 Blackhawk and putting the Blackhawk parts on the Vaquero and off-loading it on my brother in law for a real good price. How much finishing is typically required to fit the grip frames? Do you think it's a good idea?

Keep up the great work with the articles, bullets, and this forum!

Mike,
got any of those in the Bisley shape that need testing?
Reply With Quote
  #8  
Old 07-19-2005, 08:18 AM
Marshall Stanton's Avatar
Super Moderator
 
Join Date: Dec 2000
Location: North Idaho Panhandle
Posts: 3,373
Steven,

That's a great buy on one of the 5.5" Bisleys! No, I don't need anothe one either..... not now. But, I'd surely consider picking it up if you don't!

Heck, Idaho would welcome it as a new resident of this fine state, and it wouldn't have to be surrounded by synthetic gun counterfits!

Mike,

Yeah, I know that my little Bisley could use some new rouge and lipstick! I just don't have the time to crank out a set of grips.... Dang, I even have some cherry, maple, walnut and eipai tucked away for a rainy/snowy day.... perhaps someday when I'm not making you fine gentlemen bullets!

By-the-way, those are some handsome looking stocks you've built! Are those mesquite?

Thanks, and God bless,
__________________
Marshall
Romans 1:16



Beartooth: A Bullet Worth Waiting For!
Reply With Quote
  #9  
Old 07-19-2005, 08:38 AM
Beartooth Regular
 
Join Date: Sep 2002
Posts: 3,023
I was looking at GunsAmerica last night, as well as the auction sights, and noticed that it's a good $100 under whats being asked, so I called in and put a deposit on it. Never hurts to have a little trading material either way. If they have more than one I'll pass on the information to you.
Reply With Quote
  #10  
Old 07-19-2005, 08:53 AM
MikeG's Avatar
The Hog Whisperer (Administrator)
 
Join Date: Jan 2001
Posts: 32,909
Mesquite, yeah.... and they're hard. Real hard. Lost track of the hours spent on those.... you could have cranked out a couple of tons of bullets in that time frame, easily!

Steven.... you are a generous man. Those are for a Vaquero; I do have a 5.5" stainless .45 Bisley... and let me tell you what.... you are in line for the SECOND set of mesquite Bisley stocks that I get around to making!

BTW I got my stainless (used) for $400 so if you can get a new one for that price... I'd sure jump on it. Throats will need to be opened up, but if that's the case, email me when you get it and I've got some information on that you'll definitely want to read, in addition to Marshall's fine work, of course.

Plan for the .44 Bisquero sounds good to me. You can always just trade parts temporarily and see how good it looks.
__________________
MikeG

Quote:
Originally Posted by faucettb
Welcome to the forum. Rules are simple, be nice and join in.
Reply With Quote
  #11  
Old 07-19-2005, 11:27 PM
Beartooth Regular
 
Join Date: Sep 2002
Posts: 3,023
So Mike,
are ya done with that FIRST set of Bisley grips yet?

You need to think real hard about that Chinese Quince Burl I showed you.

I'm currently doing work with a customer that has furniture that appears to be made of the stuff...it's always nice to have $100,000,000 ,or so, in the bank. Perhaps I can talk her out of an end table....how many grips do you think that would make?
Reply With Quote
  #12  
Old 07-20-2005, 07:07 PM
MikeG's Avatar
The Hog Whisperer (Administrator)
 
Join Date: Jan 2001
Posts: 32,909
A bunch. Grab whatever scraps you can
__________________
MikeG

Quote:
Originally Posted by faucettb
Welcome to the forum. Rules are simple, be nice and join in.
Reply With Quote
  #13  
Old 04-06-2006, 08:27 PM
Beartooth Regular
 
Join Date: Jan 2002
Location: benton, ky
Posts: 555
Marshall, That is a great article indeed. I am thinking of picking up a Ruger to do this very project on.
I do have one question for you though, does the new front sight get caught up in the holster being such a square front edge on it? I had a S$W 3"629 that had a target front sight similar to that, It did not take long to change it out, this was a ccw, it hung up all the time on my holster.
Thanks for all the great reading!
John, A.K.A. Halfbreed
__________________
overkill? how much more dead, is dead, than dead.
Reply With Quote
  #14  
Old 06-13-2009, 05:06 PM
Registered User
 
Join Date: Jun 2009
Posts: 1
Marshall,

Thank you for a great article.

Where did you get the Ruger Stainless Bisley grip frame and trigger and hammer for your project?

God Bless,

Mark
Reply With Quote
  #15  
Old 06-13-2009, 08:20 PM
MAC702's Avatar
Beartooth Regular
 
Join Date: Jan 2009
Location: Clark County, NV
Posts: 332
I see it's late for comments, but I did notice in the box for +P load data that you say it is not for "New Model Vaqueros." There's no such thing. It's a "New Vaquero." Really, all Vaqueros, the original and the New Vaquero are "New Models" in that they have transfer bar safeties. Ruger really did us a disservice in stopping production of the original Vaquero and in also naming the smaller one a "New Vaquero."

EXCELLENT article, though. I thoroughly enjoyed the prose and the expertise. I intend to start taking some measurements of my Vaquero .45 and see what needs to be done! It's my favorite shooter, and probably my least expensive. It has protected me as a legal CCW piece in the city and has taken deer in Washington State with a one-shot stop at 105 yards with factory Winchester Silvertips. Honestly, I'm scared to touch it!
__________________
Dieu n'est pas pour les gros bataillons, mais pour ceux qui tirent le mieux.
Reply With Quote
  #16  
Old 06-25-2009, 05:45 PM
Beartooth Regular
 
Join Date: Sep 2002
Posts: 3,023
MarkV,
Not Marshall, but...

They used to be sold by Qualite, which I think turned into MK Technologies...and I believe you can get them from Brownells.
Reply With Quote
  #17  
Old 01-15-2011, 07:12 PM
Registered User
 
Join Date: Jan 2011
Posts: 1
Love this article. Recently did the same with 2 older Vaqueros. Installed the Grand Marshall Tigger and Hammer kits for the Beasly. Would like to know more about the Beasly grip frame and how hard to install.
Best article on Ruger hand guns I have ever read. Lots to think about. Thank you very very much. PLC
Reply With Quote
  #18  
Old 02-11-2012, 08:45 PM
Beartooth Regular
 
Join Date: Feb 2012
Location: western Oregon
Posts: 41
Awesome article, love the DIY part of it. Can't wait, hopefully this summer I'll do one of my own.

Greenhorn
Reply With Quote
  #19  
Old 02-09-2014, 02:27 AM
Registered User
 
Join Date: Dec 2012
Posts: 21
Questions- Slugging and Firelapping

I have read the BTB booklet on firelapping and the articles on working on ruger cylinders. I still have some questions.
1) I noticed when slugging the bore the dimensions listed both with the thread choke and without the thread choke. How do you get the slug backed out without going through the thread choked area?

2) I noticed in Marshall's article on the "Ruger Single-Actions: America's best Do-It-Yourself Kit" that he opened the chamber throats to a full .002" over the bore size. That seems like a lot. I thought .0005-.001 chambers over bore size was optimum. Am I wrong here?

I have 4 Rugers to do. Two blued SA 44 spls, one SS Bisley 45 convertible, and a SS 4" Redhawk in 45 colt. I have already purchased a bunch of the BTB lapping bullets in bot .44 and .45 along with the BTB lapping compound. I just want to make sure I have everything right in my head before proceeding with opening up the chamber throats. Any help here would be much appreciated.

Mike
Reply With Quote
  #20  
Old 02-28-2014, 12:05 AM
Registered User
 
Join Date: Dec 2012
Posts: 21
Just did the firelapping today. It took 126 rounds on my SS Ruger 45 colt Bisley conv. The session went great. Between cylinders-full my buddy would scrub the bore with Chore Boy wrapped on a brush with solvent and I would clean the cylinder. In all it was 21 cylinders-full and we were able to do it in about an hour and a half. It helps having 2 people working. I burnished the bore tonight and did a detailed disassembly, clean and reassembly. It is really nice. We will do my buddies Ruger on Monday. His should go quicker as his is blued. Got some more guns to do and just have to wait for BT to ship the stuff. I wish there was a faster way to embed the compound into the bullets......that by far is worst part of the whole process.

I can't wait to go shoot for groups.Does it hurt to do the loading in steps? Like roll the compound one night etc. It seems like the compound would dry out. Does that matter?

Last edited by Mike.44; 02-28-2014 at 12:08 AM. Reason: add
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ruger announces new cartridge - the .204 Ruger alyeska338 Rifles and Rifle Cartridges 39 12-14-2008 07:39 PM
Ruger 3 Screw Single Six TAC Handguns 2 05-19-2005 02:59 PM
Info on rare Ruger Single Six SCGunNut Handguns 1 08-15-2004 09:17 AM
Options of actions on Ruger and CZ rifles Paulinus Rifles and Rifle Cartridges 4 06-18-2004 06:12 AM


All times are GMT -8. The time now is 10:56 AM.

< Contact Us - Shooters Forum - Archive - Privacy Statement >

 
 

All Content & Design Copyright © 1999-2002 Beartooth Bullets, All Rights Reserved
Privacy Statement | Contact Webmaster
Website Design & Development By Exbabylon Internet Solutions
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1