Joined
·
50 Posts
I know this is kind of a double forum question, but here goes. <!--emo&
--><img src="http://beartoothbullets.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=''><!--endemo--> I recently purchased a 25-35 model 94 and would like to see if anyone had a good load recipe they are willing to share. Also, I know some people might cringe at the thought, but I am thinking of having the chamber cut to an Ackley profile. Does anyone have any experience with one of these? Based on what I have been able to read, it seems to make a big improvement.
Thanks Much
Juan
--><img src="http://beartoothbullets.com/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=''><!--endemo--> I recently purchased a 25-35 model 94 and would like to see if anyone had a good load recipe they are willing to share. Also, I know some people might cringe at the thought, but I am thinking of having the chamber cut to an Ackley profile. Does anyone have any experience with one of these? Based on what I have been able to read, it seems to make a big improvement.Thanks Much
Juan
