Shooters Forum banner


2053 Views 6 Replies 6 Participants Last post by  Ozzy
I have a friend that has a 30-378 McMillan Rifle with a 30" inch barrel. The rate of twist is 1/10. The action is bedded and the barrel is free floated from the lug to the tip. He hand loads his ammo and is running a velocity of 3200-3300 fps. He is using a 180 grain bullet and cannot get better than a 3" group at a 100yrds. I suggested a 200 or a 225 grain bullet and backing down of the fps. I'm not sure of the powder but he said that he has the slowest burning powder he could find. He has 113 grains of powder with a slight compressed load.. My question for all those who are smarter than me is ..... What would you recommend he do with the situation...
1 - 2 of 7 Posts
Thanks for the info fella's, I will try and get the load data and look at his gun to see if it is pillar beded and any other paticulars that might help
1 - 2 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.