Shooters Forum banner

303 British firing pin

865 Views 4 Replies 4 Participants Last post by  PEL
I was using my 303 yesterday when after the first round discharged normally the next couple misfired, upon closer inspection the firing pin is not contacting the primer, the first cartridge has normal indent not looking like any pressure issues, I am noticing that as I do the bolt head up it is pushing the firing pin back has anybody dealt with this before
cheers
1 - 5 of 5 Posts
Welcome to the Forum. Not sure what .303 caliber rifle you are using or the cause of the problem. More information is needed and there are folks here who will try to help you. All the best...
Gil
I would pop over to 303.com, if their're still active they can help out
We could help here if we knew what rifle and model.
Welcome to the Forum. Not sure what .303 caliber rifle you are using or the cause of the problem. More information is needed and there are folks here who will try to help you. All the best...
Gil
Cheers I think I sorted it out
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top