Shooters Forum banner
1 - 2 of 2 Posts

· Banned
Joined
·
50 Posts
Discussion Starter · #1 ·
Greetings everyone,
Is there such a thing as 33WCF improved? I figure it would be very similar to the 348 improved. From what I have read the standard 33/200gr load has about the same numbers as the 348/200gr load.

Does an improved ctg offer less "wear" on a gun?

Also, what kind of numbers might the imp offer over the std?

FYI, it is in an 86 winchester.

Thanks Much
Juan Tedman
 

· Banned
Joined
·
50 Posts
Discussion Starter · #6 ·
Thanks

Thank you for the info guys,
I am not really looking to up the numbers on the 33, my original intent was just to lessen the "strain" on the gun. From what I have read, most say the 348s biggest fault, or only fault, is the dramatic case taper, leading to increased rear or bolt thrust. The 33, seems to have a virtually identical taper profile, so I thought the same might be true for it as well. Incrasing the velocity would just be an additional bonus. :)

I found only one load in load swap, and none on the powder company sites (IMR, HODGDON, and ALLIANT). Anyone have a load the would suggest?

As always
Thanks much!!!
JuanTedman
SASS 26700
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top