Shooters Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I'm going to take my Marlin 444P out for whitetails this fall and I don't know which cast bullet would be the best? I want something that will let me shoot out to 200 yards. What bullet weight should I use? Thanks
Greg
 

·
Registered
Joined
·
35 Posts
This year I'm gonna use Factory Rem. 240gr. 2250 out of my 444P. I have just started working with 280gr beartooth's over 53 gr. of R7. 2375fps. I'm am dissappointed in my groups at 50 yds though. I will put 2 inside of an inch then aflier about 2 to 3 inches from it. Usually high. I let someone else try with the same result. My rifle has 25 shots of fire-lapping through it. When I switched to the factory rounds 1 inch and under are the norm at fifty yds. By the way my bullets are sized .432. I know this may not be much help but the guys at marlin.com foreum had the same problem with some guide guns. When Marshall gets the load data out on the 300gr. and under bullets I'll try again before I go back to cast for good.

(Edited by Tony at 10:51 am on Nov. 12, 2001)
 
1 - 2 of 2 Posts
Top