Shooters Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
21 Posts
If however you try to size at room temps of around 50deg as I do at times, you will blow the O rings out of the sizer if you don't heat the sizer up somehow. PITA to take it apart and put them back into the grooves. I use a heat gun sometimes. You really do need temps of 65deg+ to not have a problem sizing. I wish I had a sizer heater.... my basement can get cold in winter.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top