Shooters Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
I haven't found a load for this bullet with H-110.  I started with 29.0 and went to 31.5, the best accuracy was about 6 inches at 75 yds (4X scope).  I am new to the gun so I thought it might be me, but I can get 3 inch groups with a jacketed load.  What about Little Gun the data in Hogdon's manual seems to show less pressure at near the same velocity.
 

· Registered
Joined
·
5 Posts
Discussion Starter · #5 ·
The gun is a Freedom Arms.  The cylinder measures three at .453 and two at .452, the barrel at .452, these are as best I can measure by flattening a .440 round ball and using a micrometer.  The bullets are Beartooth, sized .452 with gaschecks.  The groups seemed to be more consistent at 31 and 31.5 grains, so maybe I quit to soon.  Do you have a suggested maximum.  I am using Win. brass and Remington 7 1/2 primers.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top