Shooters Forum banner

Any .308 pet loads?

16605 Views 22 Replies 11 Participants Last post by  unclenick
I'm looking for some .308 load suggestions for 150gr hunting type spitzers and also 168gr match bullets.

I've seen 39.5gr IMR-3031 with a 168gr MatchKing mentioned, I assume with at 2.80" COL.

Any other suggestions?
1 - 1 of 23 Posts
My rifle really likes 43.0 grains of I4895 under the 168 MKs lit off by fed 210s. But that's my rifle and yours will probably like something different. I arrived at this recipe by using the round robin method of load development using many different components and combinations of components. Also tweaking the seating depth and torque on the action screws with different loads.
1 - 1 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top