Shooters Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Here goes...ordered a new 5 1/2" Stainless SB that arrives Wednesday.  Also ordered a Bisley frame, trigger, and hammer from Brownells that arrives Tuesday.  Now the big question...how hard is it to put them together?  I am a fairly bright handy guy with some tinkering experience.  I am not however a gunsmith.  If you recommend a gunsmith, please recommend someone reasonable that can probably turn it around in a couple of weeks max.  Thanks in advance.

(Edited by Lefty Hunter at 4:42 pm on July 29, 2001)
 

·
Registered
Joined
·
2 Posts
If you take your time and pay attention to what goes where you should have no problems.. I did a blackhawk
a while ago and every thing went well.. If you have a parts diagram it will help a lot..
Go slow,be carefull and have fun..  
I am sure you will enjoy the results of your labors..
 

·
Registered
Joined
·
14 Posts
Discussion Starter #3
Well, I just decided to send it off to Andy Horvath at Diagonal Road Gun Shop in Ohio and see what he can put together.  I'll let everyone know how it turns out.
 
1 - 3 of 3 Posts
Top