Shooters Forum banner
1 - 1 of 1 Posts

· Beartooth Regular
Joined
·
2,214 Posts
Ridge,
    The only thing I can think of other than an actual headspace problem is that the plunger that ejects the cartridge was somehow jammed and would not depress. You mentioned that the ejector had a very hard spring. Were you able to get it to depress at all? Using a tool such as a brass punch you should have been able to get it to push down flush with the bolt face without much difficulty. Hopefully, since it's on the way to the gunsmith he can diagnose and cure the problem! ID
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top