Shooters Forum banner

Breech cleaning..

5022 Views 20 Replies 15 Participants Last post by  mutt
On my new, old 94, the crown is great and I want to keep it that way. I clean my Marlins from the breech after disassemble but can't seem to find online, really clear instructions regarding tear-down for the Win.
I'm very capable and can strip and reassemble my Ruger Mark 2 pistol for example but am unsure with this gun and don't want to screw up.
I guess my question is how hard is it to get the bolt out are most of you-all getting the job done?
When cleaning from the muzzle, is there a preferred bore guide that is popular?
1 - 1 of 21 Posts
I would avoid disasembly of the 94. It can be done but is unnessasary. Many guns can only be cleaned from the muzzle and they still shot good. These were never meant to be taken down to clean. After 45 years of working on old guns I have seen many that were severly damaged by improper cleaning or improper disassembly.
1 - 1 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.