Shooters Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
817 Posts
Discussion Starter · #1 ·
Just wondering if any of you guys use this stuff. I decided to give it a try and I am real impressed with it. It's head and shoulders above the couple of other products I've used in the past. The stuff is super slick and stays where you put it. It's not meant to be a penetrating oil as it's much thicker most gun oils and a little goes a long way. Anyway, just thought I would pass it along.
 

·
Banned
Joined
·
90 Posts
Thanks for the heads up. Ive come to the conclusion awhile ago that my glocks dont need any oil. My AR doesnt require much if at all, and just about anything will work in my hunting rifles. But its still nice to hear about new stuff from time to time.
 

·
"Bad Joke Friday" Dan (moderator emeritus)
Joined
·
7,761 Posts
Sounds interesting.....did a Google search and it got excellent ratings from the reviews I saw. I'll have to give it a try. I've used a lot of different lubricants but have settled on a combination of Break-Free and Brian Enos's 'Slide-Glide'. I have a bad habit of applying a little too much lubricant which results in a dirty pistol sooner rather than later. So I've just ordered a 7 oz. spray can of 'EEZOX' which is advertised as a dry lubricant. Apply a light layer, allow it to dry for several hours and it becomes a dry film lubricant...supposedly not collecting dirt, grime, powder residue, etc..
 

·
Banned
Joined
·
4,910 Posts
. . . 'EEZOX' . . .
Yes, indeed. This stuff is really good. I use it on my AR rifles. Slicks 'em up really good. It works so well, I am stingy with its use-- on my own guns...

The can of it I have reads that it's made (or distributed) by G. B. Distributors of Solvang, CA. There is a sticker on the bottom of the can reading "Warren Custom Outdoor." Phone number is 33zero-898-147five. Website is eezox.com for those adventurous to put forth a few keystrokes...
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top