Shooters Forum banner
1 - 5 of 5 Posts

·
Banned
Joined
·
41 Posts
Discussion Starter · #1 ·
I've got an 1894, and where the rubber end of the butt of the stock attaches to the black composite line at the very end of the wood, it got hit or something and the rubber piece has a hairine crack/tear just at one end. it's more than hairline(maybe 1/16th") - maybe 1" long(down the black line at the end of the wood). What's the best way to glue/re-attach that so it's less noticable? Thanks.
 

·
Registered
Joined
·
3,251 Posts
I would use some rubber cement, pushed into the crack with a toothpick while it was held slightly apart, then taped/held shut with masking or duct tape after wiping off any excess cement that oozes out when it was squezed back together.

.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top