Shooters Forum banner
  • Hello Everyone! Let us know what you would spend a $50 Amazon gift card on, HERE For a chance to win a $50 Amazon Gift Card!
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey everyone, hope I'm posting this in the correct place. Just looking for some opinions. I have a Kimber custom 2 that I shoot my own 9MM handloads through. I loaded my last batch with Autocomp and no issues but as soon as I switched over to Alliant Bullseye powder I had 2 out of 32 cases get stuck and not eject at all. Here is as much info as I can give for now.
Case length= .741
Case flare after fired=.379
Mixed head stamp, Case marked USA.
124 GRN CPRN EXtrem bullets
4.0 GR of powder
1.140 COAL
 

Attachments

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
So for starters I'm gonna give the gun a good scrubbing. Most likely hand sort through the cases and see if I can find any short ones with the calipers. And I'll up the charge to 4.2-4.3GNS of power. Thanks for the reply and I'll post back when I get a range day.
 
1 - 2 of 2 Posts
Top