Shooters Forum banner

Case Seperation

1769 Views 15 Replies 8 Participants Last post by  George Foster
I am wondering what would cause a case to seperate 11/16" up from the base. The case will seperate I know on the expansion ring if stretched too much or from excess head space.
1 - 1 of 16 Posts
Think like RJ and yourself that the chamber is short. Ask him to run the reamer and finishing reamer in again just to be sure. If he isn't inclined to do that, take it to another 'smith and ask for the above. Also, at the new 'smith, ask for headspacing check.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.