Shooters Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
155 Posts
Discussion Starter #1
I though some of you may be interested in an article addressing a chambering issue I encountered in a Shiloh Sharps 40-65. The article was just published in the Dec. 2020 Edition of The Single Shot Exchange Magazine & can be accessed at Case Wall Thickness Matters in a "Tight Chamber". After the article was published by the magazine I made an edit to the title & some additional edits to clarify my comments on the Shiloh Sharps chamber dimensions. The changes are included in the above link. BTW, the problem I ran into is not due to a problem with the Shiloh chamber and may “crop up” and any rifle with a “tight chamber”.

Wayne
 
1 - 1 of 1 Posts
Top