Shooters Forum banner

Cleaning surface rust from barrel

7096 Views 14 Replies 14 Participants Last post by  rojkoh
Just acquired a SxS shotgun. I have cleaned the bores and they are very bright and clean. The exterior of the barrell has a couple spots that have some surface rust that I wanted to clean off. Can anyone explain the procedure for doing this. Thanks in advance for any input
1 - 1 of 15 Posts
I would use very fine steel wool as it cannot remove bluing then oil the area always when not in use
if you are getting rust issues a rebluing may be in order as it does fade with wear. Tim
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.