Shooters Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
hi , I just bought a Lyman 410459 semi wadcutter bullet mold
for my .41 magnum , and I have a star bullet sizer which bullet
punch should I order for this lyman bullet so not to mar the tip ??
also where can I buy one ??
please post,
 

·
Registered
Joined
·
4,735 Posts
. . . which bullet
punch should I order for this lyman bullet so not to mar the tip ??
also where can I buy one ??
please post,
In order not to mar the bullet tip, you can order the appropriate flat bullet punch for .41 caliber, and size the bullets nose first into the sizer die. This is the current method recommended by Star. Parts for the Star sizer may be obtain from Magma Star Engineering located in Queen Creek, AZ.
 

·
Registered
Joined
·
187 Posts
star top punch

I had to have one for a 30/30 bullet that I had to do I went to the hardware store and got a brass rod and threaded it so it would fit in the round part that you use to take the die out with works just fine I even cut it to the length so I would not have to keep adjusting it Forest Punch
 
1 - 3 of 3 Posts
Top