Shooters Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
206 Posts
Discussion Starter · #1 ·
I am using Lee's push through die to size my .44 bullets.  A gas checked water quenched wheel wieght bullet sized .430 shoots horribly (3 inch groups at 50 feet).  Since my cylinders are .432  I pushed about 30 lapping bullets through the die and enlarged it to about .4315, these bullets will not drop through the cylinders, but require the slightest push.  Only problem is that the darn things aren't round, out about 3 ten thousandths.

Any ideas on trueing it up?      
 
1 - 1 of 1 Posts
Top