Shooters Forum banner

cva accura loads

17505 Views 13 Replies 6 Participants Last post by  22 MAG
I got a cva accura and have been shooting 2 t7 pellets and 245 gr powerbelts and the shots are all over the place at 100yds.I have people say that powerbelts arent worth a crap anybody have any advice what would be worth a try.I know that as soon as i get a chance i will be switching to blackhorn 209 powder i fhink fhat shouls be a step in the right direction.thanks
1 - 2 of 14 Posts
my accura loved the 245gr powerbelts.

What primers are you using?

Are you swabbing the bore clean between shots?
I am using cci 209 in the blue box, and usually I clean the bore with solvent every 3 shots.I wonder if the mounts for the scope could be a problem.Out of the four holes on the barrel I am only using two should that matter.

My Accura wont shoot T7 for nuttin with the strong primers like the cci's. Switch to the Winchester W209 primer and give that a go.

T7 is a dirty powder and creates a crud ring, you MUST swab the bore in order to get the next bullet seated.
1 - 2 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.