Shooters Forum banner

cva accura loads

17503 Views 13 Replies 6 Participants Last post by  22 MAG
I got a cva accura and have been shooting 2 t7 pellets and 245 gr powerbelts and the shots are all over the place at 100yds.I have people say that powerbelts arent worth a crap anybody have any advice what would be worth a try.I know that as soon as i get a chance i will be switching to blackhorn 209 powder i fhink fhat shouls be a step in the right direction.thanks
1 - 1 of 14 Posts
I'm using 2 t7 pellets and 295 gr hp powerbelts in my CVA Wolf, and they shoot very well. I recently switched to winchester primers and it helped eliminate most of the crud ring that had plagued me with 777 or pyrodex.
I tried some blackhorn 209, but had inconsistent ignition, so have backed off of that right now. It did seem to be a very clean powder and more powerful than the 777 or pyrodex for the same load. I've heard a few folks remark that the BH doesn't ignite well in the CVA due to design of the breech plug, but I don't know for sure.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top