Shooters Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
49 Posts
I've been playing around with cutting down 9mm brass so I can shoot them in my Mak's
Also cast my own lead bullets.
Have had good luck using 3.5 grains of Unique and my 100 grain bullet.
I'm still working on seeing how much more I can tweek it now that the brass has been fire formed, and try using some different powders.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top