[The Bolt Man]

For some strange reason, in the past few weeks I started having trouble with dusty fines from the corn cob media clinging to the brass after it is seperated from the media. I also noticed the same fines clinging to the inside of the trumbler bowel.

I have never had this problem before. What is going on? Has anyone else had this problem.

 

[Tom W.]

Cut up a dryer sheet and put a few strips into the tumbler. It should eliminate or at least lessen the problem.

 

[unclenick]

The used dryer sheets can help pick up dust and reduce static cling. If you've used your media much, it has made a lot of dust. You can take it outside when there is a light breeze and pour it from one container into another and back a few times to get the dust separated.

 

[uncommon1]

Sounds like low humidity and static electricity are holding it in. I have the same problem when humidity is really low.

 

[Helix]

I started using a t-shirt with the neck-hole zip tied shut and the arms tied off. I throw the brass in there after they tumble and shake them around a bit. helps get the dust and klingons off. I guess a pillow case would work too but did not have one in the shop.