Shooters Forum banner
1 - 15 of 15 Posts

· Registered
Joined
·
270 Posts
Discussion Starter · #1 ·
Hello,

I was shooting on my range today, testing .22LR handloads.

At 30yds, a largish fox squirrel appeared.

My mind went, "squirrel!"

It saw me at about the same time, so I dialed down the 'scope to 4.5x, which is the minimum setting, stood up, did a Hasty Hasty sling, and sent the bullet.

The handloaded 40gn HP struck right behind the lungs - very poor placement on my part. I had not had a chance to set the trigger, so I was operating with a 5# trigger instead of a crisp 12oz trigger. I had also not adjusted the parallax off of 100yds. But I know this rifle and it hit only 1/4" further back from where I aimed. The squirrel was moving as well, so it may not have been all me.

Regardless, of the bad placement, the squirrel dropped. I've not seen the local squirrel drop with less-than-precise placement with anything but high velocity HP.

I secured the rifle an got my dog, Nikki, and we walked out there.

Sometime during all this, the squirrel had "come back to life" and was among the trees. I had Nikki sniffing around for it when it fell in among some briers and thick growth that I couldn't make it in. So I gave the command (since she had seen it fall), "Nikki, GET THE SQUIRREL!" and she was in faster than I thought a dog that size could move.

I heard a brief struggle, and Nikki came sauntering back out of the brush, covered with little green burrs and holding a largish squirrel in her mouth.

She put it down at my feet.

Then it tried to get up.

She grabbed it in her mouth and squeezed it until it stopped breathing.

And I have to say, this is something I've not seen a dog do. I've seen them shake prey to break its neck, and I've seen them just chomp. But she just squeezed it and kept on squeezing it even when it bit her.

She put it down.

It was still alive.

Not wanting to make her get bitten again, I just stood on it.

I told her "good girl!" and only then did she show how happy she was with herself.

Here's what we ended up with:


The little specs on Nikki are burrs. The squirrel looks smaller than it was because of dog drool.

Nikki, of course, got to eat the entrails. I don't know what was going on, but I botched the skinning job. The muscle wanted to stay on the skin, and I got little more than the back legs. Wasted about half the animal, but I couldn't figure out any other way. It was hot and I had to get it in before the meat could spoil.

The bullet passed through-and-though, but there were no support structure hit. Additionally, the lil' slug did expand a bit according to the exit wound. I put a hollowpoint in them as part of the handloading process.

I'd still like to know why most of the meat peeled off with the hide when I didn't wait any longer or skin any differently than usual. But overall, it was a good surprise hunt.

Nikki is definitely showing her worth again this year.

Josh
 

· The Troll Whisperer (Moderator)
Joined
·
24,600 Posts
I would be interested in knowing the process for handloading .22LR ammunition?
 

· Registered
Joined
·
270 Posts
Discussion Starter · #4 ·
Hello,

The below pic contains the instructions for handloading the .22LR as I do it.

By clicking the link to go to the full sized picture on Photobucket, you are absolving me of any and all responsibility should you try this and get hurt.



Have fun!

Oh, and if it comes up too small, just click it again and it will be readable.

Josh
 

· Registered
Joined
·
13,252 Posts
Josh,

Kudos to you for wanting to do something a little bit better! You're NUTS...but kudos, just the same! :D

In your written disclaimer, you state that factory 22LR ammo only needs a 16" barrel to reach peak velocity. How do you arrive at that conclusion? (Among many "easier" questions I have...) Would it not be easier to use a shorter-barreled gun, rather than go to all that trouble with the ammo? Given that you're using the same bullet that came in the factory loading, what is the difference in velocity between the factory stuff and your loads? I'm not asking what speed you're getting, just how much more is it than what you started with? Also, don't some of these smaller bullets have a velocity range that they're meant to work best at?

I have to be honest, here...I am taking this entire post with a sizable grain of salt. I'm not saying you're pulling our collective leg, but all of this smacks of a tongue-in-cheek ruse that I am just not ready to buy into, hook, line 'n sinker! ;)
 

· Registered
Joined
·
2,646 Posts
Josh,

I replied also on THR. Thanks for the explanation on reloading the .22. Only the computer I'm at the moment gives me a red X.

CD
 

· Registered
Joined
·
573 Posts
people sure do some strange things for amusement. I think I'll keep buying my 22lr preassembled. I'm not sure I would ever buy loaded rounds to dissasemble them to reassemble the same components. just don't see the advantage in it although it is a curiosity I have shared in as much as to know how it would be accomplished. it is interesting that you were able to round up a die that will accomplish uniform seating of a 22lr. kudos to you on that and a fun hunting story although one piece of advice. your dog will live a lot longer if you keep her lean enough to feel her ribs but not see them. that was one fat dog!
 

· Registered
Joined
·
270 Posts
Discussion Starter · #8 ·
Yeah, she's losing weight.

She wasn't getting something and she was gaining.

I began giving her a banana a day and she's getting what she needs from that.

Honestly, a lot of it is coat. She's Yellow Lab/Husky/Wolf, and has a very fine, plush coat. One of my nicknames for her is "fluffy".

But I brushed her and can feel her ribs now :D She's actually needing it daily, and so I need to find time to do it daily.

Josh
 

· Inactive account
Joined
·
4,165 Posts
I believe the term for this type of loading was "Mexican match" handloading. I am not sure where the term came from but it has been a common practice for a long time. I know others have done this. I have considered it with 7.62X54R for loading a hunting round from a surplus round. I went the other, more expensive route and just got all components as usual and loaded the rounds. Still think I may give it a try one day.

Lots of folks do some pretty radical stuff with 22 ammo to reach an end. Some 22 target folks are really in a league of there own.
 

· Registered
Joined
·
573 Posts
I never would have guessed there was husky/wolf in there. but yeah that is a recipee for a hair factory if I ever heard one.
 

· Registered
Joined
·
270 Posts
Discussion Starter · #11 ·
I never would have guessed there was husky/wolf in there. but yeah that is a recipee for a hair factory if I ever heard one.
Here, this is a video of her dumbness.

When she runs off, she is wanting out now, thinking we're going hunting now. Dogs really don't have a solid concept of the future :D

http://www.youtube.com/watch?v=3lCz0lXZQq0

You can see her fur better, and the tail is a dead giveaway. Also, look at her cranium.

Josh
 

· Banned
Joined
·
604 Posts
I really enjoyed this thread. Am I gonna try it? No way in He**. Why did he do it? Might as well ask " Why climb Mt. Everest"? Because it's there! Why not.

This thread got my juices flowin' too. In 10 days I'm leaving for the wilds of Northern Michigan for the opening of Small Game Season on the 15th. Gonna be hunting the vicious and wily Fox and Gray and Black squirrels. My arthritis keeps me out of the November woods so this is the only hunt I get to go on. I'll make the best of it. Thanks for the jumpstart.
 

· Registered
Joined
·
270 Posts
I'm calling spam.

Three whole posts and advertising online books?

Heh.
 

· Registered
Joined
·
1,220 Posts
Nice shootin' and a dandy squirrel for the pot.

I still-hunt with an antique Iver Johnson single barrel scattergun in 16 gauge. Low brass #6 always does the job. But after all the leaves are down, I switch to scoped Marlin 22 MAG loaded with hollow tips. With a steady rest, 75 yard shots can be completed.

Good hunting to you.

TR
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top