Shooters Forum banner
1 - 1 of 1 Posts

· The Hog Whisperer (Administrator)
39,117 Posts

You might also try seating the bullet out to where it lightly touches the rifling.

This might end up with a longer OAL than will feed in the magazine, but try some single-loaded.  You probably won't be able to crimp them in the groove anyway, doing this.  If it works then you can hunt down a Lee factory crimp die and make your own crimp groove.

Also make sure that there is no copper fouling in the barrel.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.