Shooters Forum banner

Getting started

2762 Views 12 Replies 7 Participants Last post by  ribbonstone2
I use about a case of shells a year and have been keeping the hulls .
I saw a used Mec 600 Jr. at the gun shop and wondered what I need to get started in reloading 20 guage 2 2/4 " Rem 1oz 7/8 shot, six fold crimp.. Can the shot be changed from 7 1/2 to six or four with out a powder change?. Nothing said in the Lyman book I have.
I already load rifle and hand gun , but never the shot gun.
1 - 1 of 13 Posts
My 2 cents........if you can get a 600jr at a good price, grab it. I started reloading shotshells about 30 years ago with a MEC 250 Super and still use it for specialty loads. Progressives can come along as you feel the need - and you probably will, once you get into it.

1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.