Shooters Forum banner
1 - 1 of 1 Posts

· Banned
27 Posts

Buy Marshalls Technical Manual. He explains everything. What he recommends is 320 grit Silicon Carbide lapping compound. It is aggresive enough to cut, but not so aggresive that you will oversize the bore in 20 or so shots. Remember firelapping is nothing but controlled wear! If you use too aggresive of a compound you can overdo a good thing too fast.

The 600 grit compound sounds like it would be really good for the final polish on your barrel.

Hope this helps,

Ray C.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.