Shooters Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3,312 Posts
First, welcome aboard! I have an article on the "K" on my website that you might find interesting. www.reloadingroom.com

The load is simple. Case of your choice; a Rem 6 1/2 small rifle or CCI 500 small pistol primer; 13.0 to 13.5 of LilGun (whatever will fit); top with the bullet of your choice from 30 to 45 grains; and then apply a crimp with the Lee Factory Crimp Die.

Do not substitute a hotter primer and do not leave out the Lee crimp. Seat bullets to feed through your magazine, or to SAAMI max for a single-shot. That's about as good as you are liable to get.
 
1 - 2 of 2 Posts
Top