Shooters Forum banner

1 - 3 of 3 Posts

·
Banned
Joined
·
50 Posts
Discussion Starter #1
I shoot 500grainers at 1650fps. I use 49.0g of H4895 in remcases and cci large rifle primers to an oal of 2.550 I use lasercast's 500g bullet. doug
 

·
Registered
Joined
·
1 Posts
41fan,

I've been looking for a starting load for the 500 grain lasercast using IMR4895, H322 or RL7.  I know that H4895 is not the same as IMR4895, any suggestions?
 

·
Banned
Joined
·
50 Posts
Discussion Starter #3
Hodgedon's 4831 and imr's 4831 are too different, that's why the data isn't interchangeable. However, H4895 and IMR4895 are very close, the data is interchangeable.  When working up my load for my guidegun, I started at 43.0g and worked up carefully. Seat the bullet as far out as possible while still being able to work through the action. This is a compressed load. Just be ready for some recoil. doug
 
1 - 3 of 3 Posts
Top