JC Higgins data. Lists which other rifles are the same.
http://www.gun-data.com/J_C_Higgins _firearms.html
http://www.gun-data.com/J_C_Higgins _firearms.html
JC Higgins scope mounts
I picked up a Sears/JC Higgins, Mod 50, 30-06 that had been sitting in the rack
at a local gun shop for quite some time. They were asking $385 for it so when
I was told I could have it for $200............
The problem I have is it has mounts already on it but I don't know what rings
fit the mounts. Looks like Weaver mounts but are too narrow for Weaver rings.
To wide for rimfire rings.
I ordered a set of Mauser 98 see-thru from Midway thinking that I could just
remove the mounts on the gun and problem solved. Not so. The mount holes
on the rifle are the same distance apart but on the see-thru's the holes in the rear
are closer together than the front. Front fits, rear don't.
I realy don't wont to drill and tap another hole in the rifle. There isn't enougth
room on the rear see-thru's to drill another hole in it to make it fit.
Any help please.... What rings will fit these mounts? I think they are like 9/16"
wide, and look like Weaver type.
Sears/JC Higgins Mod 50, Mauser action/Hi-standard barrel.
Thanks for any help.
at a local gun shop for quite some time. They were asking $385 for it so when
I was told I could have it for $200............
The problem I have is it has mounts already on it but I don't know what rings
fit the mounts. Looks like Weaver mounts but are too narrow for Weaver rings.
To wide for rimfire rings.
I ordered a set of Mauser 98 see-thru from Midway thinking that I could just
remove the mounts on the gun and problem solved. Not so. The mount holes
on the rifle are the same distance apart but on the see-thru's the holes in the rear
are closer together than the front. Front fits, rear don't.
I realy don't wont to drill and tap another hole in the rifle. There isn't enougth
room on the rear see-thru's to drill another hole in it to make it fit.
Any help please.... What rings will fit these mounts? I think they are like 9/16"
wide, and look like Weaver type.
Sears/JC Higgins Mod 50, Mauser action/Hi-standard barrel.
Thanks for any help.
1 - 1 of 8 Posts
1 - 1 of 8 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Shooters Forum
A forum community dedicated to Sport shooters, owners and enthusiasts. Come join the discussion about optics, hand casting bullets, hunting, gunsmithing, styles, reviews, accessories, classifieds, and more!
Full Forum Listing
Recommended Communities
