Shooters Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
463 Posts
You have to remove the magazine tube , take the screw that is just back of the forend on the bottom of the receiver out, also remove both screws from the metal retainer/forend tip on the front of the forend, then remove the magazine tube hanger and the magazine tube from the gun, remove the tab that held the screws from the forend retainer/forend tip on the front end, the for end should slide forward and come off.

A moderator will probably move this to the gunsmithing section for you in short order.

And welcome to the forums!
 
1 - 3 of 3 Posts
Top