Shooters Forum banner
1 - 8 of 8 Posts

· Inactive for over a decade
Joined
·
6,251 Posts
Discussion Starter · #1 ·
I bought a used MEC 650 and I got the thing together and mostly working right, but the second crimp stage is crushing shells. I need a manual or hopefully somebody know what is going on with it. Thanks!
 

· Inactive for over a decade
Joined
·
6,251 Posts
Discussion Starter · #5 ·
Thanks, I did see that, it wasn't very helpful as a manual. Regardless I got the problem fixed, the first stage wasn't crimping enough, so the second stage couldn't compress it. I have no idea how the previous owner would have made any shells though.
 

· Inactive for over a decade
Joined
·
6,251 Posts
Discussion Starter · #6 ·
Well, it wouldn't keep adjustment, so I called MEC and the Tech went through a few things and suggested sending it in for a tune up as it sounded to him that the second crimp die was way out of spec. So its off the MEC now, hopefully they can get it running good.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top