Shooters Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
I am sure this is old news, but I have a 1300 dbl. feed problem. Checked all the normal issues. At first site appeared that interrupter was out of adjustment. After that, first pump seemed ok, then dbl feed. closer scrutiny it appeared that when action bar cams interrupt, it moved into place and immediately fell off. Interrupt tab is moving up and off the action bar. Also appears the action, with receiver bottom up, comes slightly free of the bridge plate. Seems there is aprox. .005-.008 play above bolt group to receiver roof. ??? any suggestions? also, if I keep pressure on the bar, trigger group pinned in, it seems that it will cycle more in the action before bolt seems to move and action bar will slip out of grooves.
Owner says weapon has fired less than a hundred rounds in 5 - 6 yr period since bought. Hardly any where in this receiver. Not much experience with this model. Is there maybe a spring missing above bolt to receiver roof?
 
1 - 1 of 1 Posts
Top