Shooters Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have had my Mossberg 835 for about 15 years now.
Love it. But I recently started having trouble
with my safety. I can switch it from safe
to fire, but not back on safe. When I take pin
out and pull trigger mechanism out a little
I can move safety freely. I took safety apart
last night to make sure no grit was in there
but when I put gun back together it still
would not switch to safe. Any suggestions??
 

·
Registered
Joined
·
3,210 Posts
~ There should be a spring and plunger under the Safety Button, and possibly a steel plate. A dab of grease may help.
~ The screw may be too tight or too loose.
~ The concave part of the safety goes forward.

~~ Check under the Connector for debris or gunk, it may not be dropping enough to allow the safety to move.
 
1 - 2 of 2 Posts
Top