Shooters Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
1,967 Posts
Try buying from Midwayusa.com, or Midsouth Shooters. Or load cast bullets. I load jacketed bullets in my 375 Win cases and cast bullets in trimmed 38-55 brass (trimmed to 375 length) using 38-55 load info. You can buy 500 cast bullets pretty cheap compared to 100 jacketed.
 

· Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
im from canada and cant ship ammo over the border. im looking into loading my own for down the road but i was just wondering for now if the h&h 375 magnum bullets would be compatiable since there the only ones i can get my hands on right now
 

· Registered
Joined
·
1,967 Posts
I was talking about buying just the bullets, not loaded ammo. 375 H&H mag bullets aren't going to work thru the magazine, you would only be able to use as a single shot. Even then they're made to expand at much higher velocities than the 375 Win can deliver.
 

· Registered
Joined
·
47 Posts
I used to have a .375 Winchester and always used the Hornady 220 grain flat point, they still make them, check their website. These were designed for the .375 Winchester.
 

· Registered
Joined
·
2,066 Posts
Jesse, 375 H&H cartridges are not compatible with a 375 Winchester caliber rifle. The 2 are completely different cartidges, they just happen to have the same bore diameter. In other words, no, you need to find 375 Winchester ammunition, which Winchester does make.
 

· Registered
Joined
·
212 Posts
Look for .38-55 ammo - usually it can be shot in a .94BB .375W. But check that the chamber is long enough before firing!

Pete
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top