Shooters Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
I have been looking for some load data for the 35remington and 125gr. bullets.  Particularly ones that use IMR 3031 or 4320, but anything could be helpful.  I have looked through several books, but most info I find is for 150 - 200gr bullets.  I did find a load for Re7 and 125gr. bullets, but since my powder supplier doesn't stock it I have been hesitant to "special order".  Thanks in advance.
 

·
Beartooth Regular
Joined
·
7,776 Posts
Hi, Mike:
  Speer #11, 43.0 grains IMR 4895 is max. 4320 is slower, so it's OK. Actually, even 3031 is a very slow powder with this bullet weight, and the 37 grain load for a 158 grain bullet won't strain anything. You could use Red Dot for a light load. I use 10.0 grains of Red Dot with a Remington 158 gr. SJHP for a plinker & varmint load. It's good for 1400 fps and any less powder isn't consistant.

Bye
Jack
 
1 - 2 of 2 Posts
Top