Shooters Forum banner
1 - 2 of 2 Posts

· Beartooth Regular
Joined
·
1,178 Posts
Does the sprue plate screw bottom out in the hole? My LBT does this and the wavy washer is what keeps the sprue plate tension constant, not the screw tension. Veral uses an allen head type tapered screw similar to a wood screw with the taper underneath the head.

You may be able to get a slightly longer screw so it bottoms out in the hole to keep it tight allowing only the wavy washer to keep the tension.


Regards
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top