Shooters Forum banner
1 - 1 of 1 Posts

· Banned
Joined
·
25 Posts
I purchased an H&R Model 903 revolver roughly 22 years ago and have fired several thousand rounds through it. Due to misfires caused primarily by light firing pin strikes, I had a local gunsmith bevel the pin and shim the hammer spring. Problem solved.

My Model 903 is still accurate and reliable.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top