Shooters Forum banner
1 - 3 of 3 Posts

· Registered
3 Posts
Discussion Starter · #1 ·
Hello folks. I am new to this forum. I have joined in hopes of finding someone that can help me. I own a Pietta PPS 50 .22 cal. Rifle.( sold under many names ,currently Mitchell/ Mauser) It is a great shooter, we'll at least it was. I was at the range showing several friends the rifle. I'm not sure how but while a friend was shooting it developed ejection issues and the magazine ( 50 round drum) became jammed in the magazine port. I managed to remove the magazine. After a closer inspection at home I discovered the small hook on the back of the ejector had broken off. Without the hook which uses one of the receiver assembly pins to hold it in place the ejector was allowed to move, thus being pushed forward and down by the bolt, jamming the top of the magazine. I have desperately been looking for a new ejector. I checked several sources. Can anyone help me.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.