Shooters Forum banner
1 - 1 of 1 Posts

·
Inactive account
Joined
·
4,165 Posts
I learned this answer from folks on this board. "Did you measure before resizing? If so it is not unusual for some brass to flow into the head and web or sides of the brass, than into the neck. When you resize it will make the brass longer in the neck and thus need a trim. The more you have to trim, the thinner some area of the brass becomes and eventually a failure will occur."
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top