Shooters Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
127 Posts
When I first started powder coating many years ago, like other, I started out with HF powders and a cheap HF PC gun, for what it was it worked great but wasted a lot of powder, but it was cheap compared to other sources of PC. Once I got away from the PC gun as started using the shake and bake method of coating, I found that basically only the HF Red PC worked, and it was hit-and-miss. HF powders are an Epoxy based resin powders, unlike the polymer based powders that Eastwood, Smokes over on the Cast Boolits or Powder By the Pound sell.

The polymer based powders are much finer ground and give more even coating using the shake and bake method with a lot less fuss, not all colors of the polymer PC coat well, but the majority do an excellent job. HF PC is around $8 a lb. around here, and they only offer White and Black neither of which I like or use. I would rather have half the amount of any other companies powder coat at the same price as HF powders are and get a much better end result.

Natural material Rectangle Earrings Font Jewellery


Light Natural material Wood Jewellery Art
 
1 - 1 of 1 Posts
Top