Shooters Forum banner

problems with my!

4733 Views 4 Replies 3 Participants Last post by  mattsbox99
ive recently purchased a second hand smith and wesson sigma sw9ve. about every 5th round ill have a light primer strike. i dissasembled the pistol and it seems the firing pin is hanging. i cant tell if anyone has tried to lighten the trigger pull. can someone give some advice or instruct me on how to get the firing pin out of the gun so i can try to fix it. thanks in advance for your help!:confused:
1 - 3 of 5 Posts
i dont know about s&w warrantys. or even if my gun has one. will it be expensive?
i fixed the problem with the light primer strikes. the spring retainer on the striker assembly was worn causing the retainer to jump up onto the stiker itself causing clearance issues inside the striker guide. $2.50 worth of parts and 500 rounds later with no ftf or fte
1 - 3 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.