Shooters Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
108 Posts
I did some tuning on the used Vaquero, I just bought.
I got the most benifit from polishing the transfer bar's forward face. It rubs on the little spring loaded tip of the base pin, and the original has tool marks. I polished it on a 1000 grit waterstone,  I did a little stoning on the back side to, where it runs in the slot in the frame.
It looks like the fit is pretty sloppy, and am considering shimming it.  Since I polished it, it feels much better than my new Vaquero.
Dan
 
1 - 1 of 1 Posts
Top