Shooters Forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
96 Posts
You said in your message:

I have lubed them using Alox and sized them with a .429 Lee sizer. (I did not lube them the second time after sizing)

This might be your problem. If you were using the liquid alox which should be thin, you took the lube off the driving bands of the bullet putting through the sizer. Leaving only a small and probably inadequate amount of lube in the lube grooves. I do not know how accurate you need to be shooting this bullets, but generally I will make up a dummy round with one of my bullets and see if it fits the chambers. If goes I load them up as cast with lee liquid alox. They shoot pretty good too. I really am not sure if sizing them would help my accuracy that much. My nickname here says it all.
 
1 - 1 of 1 Posts
Top