Shooters Forum banner

Ramshot X-Terminator or RE-10X ?

2581 Views 4 Replies 4 Participants Last post by  mattsbox99
Do you any of you have experience using both of these powders? How similar are they? If you couldn't get one, would you substitute the other (not the same exact charges, of course) and expect to get good performance from whichever cartridges you reload with these powders?

This is for one of the wildcats I've been working with and when I went out to buy some Ramshot X-terminator, I could not find it anywhere. I would like to use RE-10X as a substitute, but want to have a better understanding of whether or not the two are close enough to do that with.

1 - 1 of 5 Posts
I've used both, and you are correct that for similar applications, they are both useful. They are fairly fast rifle powders, X-Term being a spherical and 10-X being a short-cut extruded. Both, for example, are recommended for light bullets loads in the .223.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.